Others Functions; Display Function - Haier L42A9-AK Owner's Manual

Others functions

Program Edit
DISPLAY
Scan
Sleep
32
Scan Nicam and display functions
NICAM
Press the I/II button will result in fast swap of NICAM
function of current program.

Display function

Press the DISPLAY button, then
the channel number and system
will be displayed on the screen.
Press the DISPLAY button
it is disappear.
Scan
1
If you want to select a desirable program, you may
scan all the TV programs in memory. You can simply
press SCAN button to do this. Press scan button once,
there are nice pictures on the screen, press Scan button
again, there are sixteen pictures on the screen to scan.
2
If you want to stop the function during auto tunning,
simply press SCAN button again.
Sleep
The TV set will switch automatically to standby at the
preset time with the SLEEP time on. You may set the
sleep time.
each press of SLEEP button repeatedly on the remote
control to select the number of preset minutes, the timer will
be set in sequence: (0min, 5min, 15min, 30min,60min,
90min, 120min).
After the sleep time is programmed, the display will appear
briefly every ten minutes to remind you that the sleep timer
is operating.
To confirm the sleep timer setting, press SLEEP and the
remaining time will be displayed for a few seconds.
To cancel the sleep timer, press SLEEP repeatedly until the
display turns to 0 min.
again,
3
AUTO
B/G