Table of Contents
Advertisement
Preparation For The Remote Control And The Screen
1 Remove the cover of battery
compartment as shown in the figure
2 Properly load one 1.5V
battery(AA) 2 in the compartment
of the remote controller.
Do not mix new and used
batteries.
Cautions:
1 Ensure that there is no obstacle
to signals from the remote controller
to the receiving sensor of the
television set.
3 Do not operate the remote
controller directly in floodlight
or strong sunlight.
TV game/PC
If the TV set is used for playing TV games or PC for a long time, permanent shadows will
appear on the screen. Please follow instructions below to avoid such retrieval damages
to the LCD screen.
---Set the brightness and contrast to a lower level;
---Please avoid display a static image on the screen, otherwise a permanent afterimage
will appear on the LCD screen.
---static image, including sign, video game, computer image, teletext, and 4:3 picture
mode;
---The damages of the LCD screen panel below don't belong to the operation bugs,
therefore they are not included within the guarantee;
Caring of the TV cover and the LCD screen panel:
Unplug the power cable from the outlet on the wall, use a soft cloth moistened with
neutral detergent to clean the cover and the screen.
Don't use benzene, alcohol-based or gasoline to clean the TV.
NOTE:
If the environment temperature is much low, the picture will reach the
normal brightness after a period of time. It is not the trouble of the TV (the picture will
reach a normal brightness after a while).
There might be separate brightness or scotomas on the screen, or there might be some
blue, green or red dots which are dead pixels. These won't affect the LCD screen.
Alkaline
3 Replace the cover of the battery
compartment.
Do not recharge the
batteries.
2 Keep the remote controller away
from heat source or high moisture
and avoid impacts to the remote
controller.
Advertisement
Table of Contents
