Tv Set Up; Osd Tune Setting; Signal Source Setting; Changing The Picture Standard - Haier L30CV6-A1 Owner's Manual

Signal Source Setting

Language English
Source TV
Osd Tone
Size Fill Screen
Changing The Picture Size
Language English
Source TV
Osd Tone
Size Fill Screen
The information provided on this page is useful if you find
that some channels have not been stored during the initial
set-up process.
There are some different signal sources in this set, and
you may select the signal source that show up as the following
sequence:
1 Press MENU button repeatedly to select Setup menu.
Off
2 Press
3 Press
want.
4 Alaso you can select the required signal source by
simply pressing the INPUT or the PC/TV button on the remote
control.
NOTE: In the sub menu, the Source may show up as in the following
sequence:
TV AV SCART AV S-Video
There are some different signal size in this set, and
you may select the size that show up as the following
sequence:
1 Press MENU button to select Setup menu.
Off
2 Press
3 Press
button to select Source item.
button to select the signal source that you
SCART RGB YCbCr YPbPr DVI PC
Fill Screen 4:3 Wide Cinema Sub Title.
button to select Size.
button to select the size that you want.