Osd Position; Osd Transparency - Haier L26V6-A8 Owner's Manual

2. Press VOL+ button on the remote controller to
enter the menu of system setup.
3. Press CH+/- to select desired item on the menu.
4. Press VOL+/- to adjust values level.
OSD language option
Repeat step 3 and 4 to select the language either
Chinese or English.
Suspend mode
Repeat step 3 and 4 to set on or off Suspend Mode.
5 minutes after the Suspend Mode is set, the
system will enter an energy efficiency status
(standby mode).
Background ON/OFF
Repeat step 3 and 4 to select Background ON/OFF
when no signal appears on the screen.

OSD Position

Repeat step 3 and 4 to locate OSD freely on the
screen for the most desirable position, including
top left , top center , top right , center left , center,
center right , bottom left , bottom center and bottom
right.
Note: OSD Position can only be selected when
OSD Stretch is not intended.

OSD Transparency

Repeat step 3 and 4 to select semi transparency
and opaque background of OSD.
OSD Stretch
Repeat step 3 and 4 for option of OSD Stretch on
or off.
Color system option
In TV/AV1/AV2/Svideo mode, repeat step 3 and 4
to set the color system of the front interface among
the options of automatic, PAL, PAL60, NTSC3.58,
NTSC4.43 and SECAM. Automatic mode is usually
set as default.
System setup
CH+
VOL- MENU
CH-
English-20
VOL+