Sharp LC-52SE941U Service Manual page 20

LC-52SE94U/LC-52SE941U/LC-65SE94U
14.Remove the 2 lock screws, 4 lock shafts and detach the Main Terminal Angle.
15.Remove the 3 lock screws and detach the AC INLET Unit.
16.Remove the 6 lock screws and detach the POWER Unit.
17.Remove the 5 lock screws and detach the TERMINAL Unit.
18.Remove the 1 lock rivet and detach the Main Shield Plate.
19.Remove the 3 lock screws, 2 lock screws and detach the Heat Sink and MAIN Unit.
19
14
14
19
14
Main Terminal Angle
Heat Sink
Main Shield Plate
18
MAIN Unit
POWER Unit
TERMINAL Unit
4 – 5
16
AC
INLET Unit
17
15