Table of Contents
Advertisement
Appendix
Removing the Stand
Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
CAUTION
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
LC-52SE94U
Before attaching/detaching the stand
Before performing work, make sure to turn off the TV.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1
Hex key
Unfasten the four screws used to
secure the stand in place.
To attach the stand, perform the above steps in reverse order.
LC-65SE94U
Before attaching/detaching the stand
Before performing work, make sure to turn off the TV.
1
Unfasten the four screws used to
secure the stand in place.
To attach the stand, perform the above steps in reverse order.
2
Detach the stand from the TV.
(Hold the stand so it will not drop
from the edge of the base area.)
2
Detach the stand from the TV.
2 – 3
LC-52SE94U/LC-52SE941U/LC-65SE94U
3
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the TV, and press
until they lock into place.)
3
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the TV, and press
until they lock into place.)
Advertisement
Table of Contents
