Remote Control; Installing Batteries - Haier L1510A-C User Manual

Remote Control

Installing Batteries

1.Slide open the cover of the battery compartment on the back of the remote
control.
2.Load two AAA
respective mark)
3.Replace the cover of the battery compartment.
Precautions
Make sure that there is no
obstacle between the remote
controller and television set.
Keep the remote control
away from heat sources or
humid areas to ensure
effective performance of
the remote.
alkaline batteries in the compartment. (plus and minus poles to
As strong light may interfere with the
signals, change your position to
operate the remote control if
the television cannot be turned
on or off as expected.
Make sure that two
batteries are loaded. The batteries
must be of the same type, must be
inserted properly, and must not be
rechargeable.
AAA alkaline