Table of Contents
Advertisement
Listening to music from your
external device
The unit can be used to play the music from many types of external device.
1 Connect the external device to the AUX
connector of the unit.
> If your TV has only one output for
audio(MONO), connect it to the
left(white) audio jack on the unit.
VCR, TV, ...
Your unit
Turn the power on.
3 Select the AUX function.
Turn on the external device and start it
playing.
16
MD9350DV-A0U_DKENHL_ENG_6121.ind16 16
ON UNIT
ON REMOTE
POWER
1/ |
Compatible USB Devices
AUX
FUNCTION
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.
• This USB Function may not be available depending on devices.
USB device requirement
• Devices which require additional program installation when you have con-
Look out for the follows
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
• This unit is not supported when the total number of files is 1000 or more.
• External HDD, Locked devices or hard type USB devices are not supported.
• The unit can not be used as a storage device.
• USB port of the unit can not be connected to PC.
Using an USB device
You can enjoy media files saved on an USB device by connecting the
USB device to the USB port of the unit.
If you want to operate other function, see the CD playback section.
1 Connect the USB device to the USB
port of the unit.
Select the USB function.
3 Select a file you want to play.
Start your media playing.
5 To stop, press
6 Before disconnecting the portable
USB device, change to any other
function.
nected it to a computer, are not supported.
searched.
recognized.
supported.)
ON UNIT
ON REMOTE
USB
FUNCTION
U u
B
/ ENTER
B
STOP
x
TUNER/TAPE/...
FUNCTION
2009.5.13 5:25:1 PM
Advertisement
Table of Contents
