Remote Control Codes - Haier HL55XZK22 Owner's Manual

Universal Remote Control
F
POWER key, If the device responds, no further
Press
programming is required. If the device does not
respond repeat steps 1 through 5.
G
After searching the entire data base, this mode will be
automatically exited and led will blink for 3 times. The
codeset is not saved to EEPROM.
In automatic scan mode, press any key other than
ENTER key will exit without programming.
Display mode
A
Choose the device you wish to program.
B
To enter display mode, while press and holding
ENTER key, press the INPUT key and device LED will
be ON, keep the status for about 3 seconds and the
LED will blink, indicating that the Controller is ready
for programming, then release both keys.
C
Sequence press 9, 8, 0 to enter display mode.
D
Press digit 1 key to get the first digit of current
codeset. For example, if the first digit of codeset is 1,
so then led will blink once and remains OFF. Digit "0"
in codeset will not be displayed. Blink Freq is 1 HZ.
E
Press digit 2 key to get the second digit of current
codeset. For example, if the second digit of codeset is
3, so then led will blink three times and remains OFF.
Blink Freq is 1 HZ.
F
Press digit 3 key to get the third digit of current
codeset. Blink Freq is 1 HZ.
G
Only digit 1, 2, 3 are valid in this mode. And the
sequence is not fixed.
Controller will not send out data in this mode if user
presses any keys other than digit 1, 2, 3, or no key was
pressed in 30 seconds, display mode is ended.
Punch-Through Features
The Controller provides two punch-through features
that allow users to control TV volume and DVD or VCR
operation while the Controller is in another device mode
control certain features of another device.
Volume Punch-Through
Y
The TV Volume/Mute punch-through feature allows
you to control the volume and mute function of your
TV while the Controller is in another device mode. The
feature is applicable for all devices and brands that do
not use the volume control buttons for other purposes.
EN-29 Haier LCD HDTV
Transport Key Punch-Through
Y
The DVD or VCR transport key punch through feature
lets you control the PLAY, STOP, PAUSE, REWIND, FF and
RECORD functions of your DVD or VCR while the Control
operates in other modes. The feature is applicable for all
devices and brands that do not use the transport keys
for other purposes.
Fast Programming Haier default TV codeset
Press and holding the ENTER key and then press POWER
key for 3 seconds, the LED will blink 3 times and turn off,
default Haier codeset (001) will be programmed to the
control.

Remote Control Codes

TV
NO. Brand Code
1 Haier 001 002 003 004 005 006 007 008 009 010 240 241 297 307 355
2 Abex 077
3 Acer 267
4 Addison 333
5 Admiral 057 078 334 338
6 Advent 324
7 Adventura 079
8 Aiko 066 333
9 Aiwa 165
10 Akai 038 058 258 271 279 331 350
11 Albatron 321 325
12 Alleron 068
13 America Action 335
14 Ampro 323
15 Amtron 067
16 Anam 335
17 Anam National 059 067
18 AOC 060 061 062 222 331 349 350 353
19 Apex 092 135 151 195 339
20 Archos 308
21 Astar 259
22 Audiovox 067 189 191 207 256 333 335 337
23 Aventura 053
24 Axion 280
25 Bang & Olufsen 345 346
26 Baur 058
27 Belcor 060 349
28 Bell & Howell 057
29 Benq 245 246 284 329
30 Bradford 067 335
31 Brillian 342
32 Brockwood 060 349
33 Broksonic 197 335 338
34 byd:sign 310
35 Candle 060 062 063 079 331 350
36 Carnivale 331 350
37 Carver 055 320
38 CCE 239 351
39 Celebrity 058
40 Celera 339
41 Centurion 064
42 Changhong 339
43 Ching Tai 333
44 Chun Yun 333 335 361 374
45 Chung Hsin 335 364
46 Citizen 060 062 063 066 067 074 076 331 333 350 352 354 380
47 Clarion 335
48 Coby 210
49 Colortyme 060 062
50 Colt 377
51 Commercial Solutions 332
52 Concerto 060 062
53 Contec 335