Installing The Software - T&D TR-81 Instruction Manual

Thermo recorder

Hide thumbs Also See for TR-81:

Table of Contents

Installing the Software

１１１１１

．．．．． Before beginning installation please check the following

◆ Is Windows working properly ?

If Windows (3.1 / 95 / 98 / NT 3.51 / NT 4.0) is not activated properly, it may

be impossible to install and run Hi for Windows.

◆ Quit all other applications.

If you are running other applications, make sure to quit them before installa-

tion.

２２２２２

．．．．． Install the Software ( Hi for Windows )

① ① ① ① ① Start Windows. (3.1 / 95 / 98 / NT 3.51 / NT 4.0)

② ② ② ② ② Place Software Disk in appropriate drive and open the [Win_eng] folder.

③ ③ ③ ③ ③ Open SETUP .EXE .

④ ④ ④ ④ ④ The dialog box 'Setup: Hi for Windows' will appear.

⑤ ⑤ ⑤ ⑤ ⑤ Check Copy to: if appropriate click OK to start copying.

※ ※ ※ ※ ※ 「C:＼」represents the hard drive that Windows is installed in. If you want to

change the location please type in the desired drive and continue.

⑥ ⑥ ⑥ ⑥ ⑥ After installation is completed a Hi for Windows Folder will be created and an

icon for [Hi for Windows] will appear in the Start Menu.

Open Hi for Windows by clicking on this icon. (See below)

Table of Contents