LG F4V909WTSA Owner's Manual page 29

global_main.book.book Page 28 Monday, August 23, 2021 3:24 PM
OPERATION
28
Delay End
You can set this function so that the
appliance starts automatically and
finishes after a specified time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Delay End button as
necessary.
4
Press the Start/Pause button.
NOTE
• Except for LED of the Delay End
button, all LEDs on the control panel
will be turned off within 20 minutes.
This feature may vary depending on
the model purchased.
• The delay time is the time to the end of
the programme, not the start. The
actual running time may vary due to
water temperature, clothes and other
factors.
• To cancel the function, the Power
button should be pressed.
• Avoid using liquid detergent for this
function.
Using the ezDispense
Use the Dispenser 1 and Dispenser 2
buttons to set up and control the
ezDispense function.
Dispenser 1 button
A
Dispenser 2 button
B
Liquid detergent indicator
C
Link indicator (Using only liquid
D
detergent both compartments)
Liquid fabric softener indicator
E
NOTE
• When the detergent or softener is
insufficient;
- In case of pressing the Power
button: The LED will blink and the
chime will sound.
- In case of running the appliance: The
LED will blink.
• The default settings are configured to
dispense the detergent of Dispenser 1
and the fabric softener of Dispenser 2.
Changing Dispense Level for a Single
Load
1
Press the Power button.