Operation - Fujitsu ACY40UI-MI Operating Manual

OPERATION

Instructions relating to heating (*) are applicable only to "HEAT & COOL MODEL" (Reverse Cycle).
To start/stop operation
To set the operation mode
Operation mode setting
●
Room temperature setting
●
Lower Rise
Fan speed setting
●
ECONOMY operation
En-6
Press the START/STOP button.
Operation lamp
Air conditioner ON:
Air conditioner OFF: Not lit
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
AUTO COOL
Press the SET TEMP. buttons to set the room temperature.
Temperature setting range
AUTO ............................................... 18 to 30 °C
COOL/DRY ...................................... 18 to 30 °C
HEAT* .............................................. 16 to 30 °C
Press the FAN button to set the fan speed.
AUTO HIGH
Press the ECONOMY button to start or stop ECONOMY operation.
For details on the function, refer to page 11.
Lit brightly
DRY HEAT*
FAN
MED LOW QUIET