Installing The Thermostat - Aube Technologies TH114-A-024T-15S Owner's Manual

Non-programmable thermostat
Table of Contents

Advertisement

Available languages

Available languages

Owner's Guide

Installing the thermostat

Turn the heating system off at the main electrical panel.
Loosen the bottom screw and remove the thermostat
faceplate from its wallplate. (The screw cannot be
completely removed.)
Wire the thermostat. See typical wiring on pages 8-9.
If the thermostat will be used in F or AF mode (see page 10),
connect the floor sensor (see page 7).
Install the wallplate on the wall using the provided screws
and wall anchors.
Set the configuration switches (see page 10).
Install the faceplate back on the wallplate and tighten the
screw. If there is a sticker on the screen, peel it off.
You can now return power to the heating system at the main electrical panel.
6
Faceplate
Wallplate

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th114-af-024t-15sTh114-a-24tTh114-af-024tTh114-a-024t

Table of Contents