Begin To Use - Haier HRF-488FR Operation Manual

Begin to use

①
Switching on
For the first time use of the appliance,
it is required to let it stay idle for 6
hours before switching it on. If there
is power failure, or power interruption,
wait for about 5 minutes to start the
appliance.
②
T e m p e r a t u r e p o s i t i o n
setting
The temperature inside the appliance
is adjusted through the thermostat dial
l o c a t e d i n t h e r e f r i g e r a t o r
compartment. Taper end of the
thermostat is the indicating direction of
the thermostat. When turning
clockwise the thermostat dial, the
temperature inside the refrigerator
shall change from high to low; Position
"OFF" indicates the appliance do not
carrying out cooling, but without
switching it off.
For usage, generally set the
thermostat on the middle but weaker
position. In Summer, with high ambient
temperature, turn the thermostat dial
to the position "weak".
③
Putting food in the refrigerator
After some time of switching on, the
interior of the refrigerator shall be
completely cooled. Then foodstuff can
be put inside to start regularly usage
of the appliance.
When changing the temperature setting position, it shall take some time for the
internal temperature to reach balance. And the length of this balancing time varies
with degree of the change in the temperature setting, the degree of ambient
temperature, door-opening frequency, and the amount of food stored.
COLD
Recommended
position
COLD COLDER
COLD COLDER
COLD COLDER
COLD COLDER
COLD COLDER
7
COLDER
Using occasion
Ambient temperature≥32℃
Ambient temperature25~32℃
Ambient temperature16~25℃
Ambient temperature10~16℃
Ambient temperature〈10℃