Wacom CTL-672 User Manual page 25

Allows you to pan or scroll in a document or an item by moving the pen tip up and down or right
and left. Your screen cursor will remain in place while you move the pen tip.
Pan/Scroll
When you select
preferred scrolling speed.
Allows you to pan or scroll by moving the pen tip up and down or right and left. Your screen cursor
will move with the pen tip.
Pan/Scroll
(Legacy)
When you select
your preferred scrolling speed.
Pans or zooms, depending on whether you are hovering or touching the device surface.
To pan, hover above (but do not touch) the device surface, and then press and hold the
button while moving your pen.
To zoom, press and hold the button while touching the device surface and move the pen
towards the top to zoom out or towards the bottom to zoom in.
If you want to pan again after zooming, release the button and press it again.
Pan/Zoom
Notes
If the application does not support Pan/Zoom, the following happens instead:
When you select
Move the slider to your preferred zooming speed.
Changing the
Toggles between normal precision and a precision that you choose, from
In the
toggle into.
Precision
Mode
For example, if you assign Precision Mode to a pen button, when you press the pen
button, you switch to working in the precision that you selected from the slider. When you
press the pen button again, you switch back to working in the normal precision.
Locks the pressure at the current level until you release the component.
Pressure
For example, if you assign this setting to a pen button, you can paint with pressure sensitivity
Hold
enabled in your application until you reach the brush size you like. Then, press and hold the pen
button to lock in that brush size as long as you are pressing and holding the button.
Right Click Performs a right mouse button click.
Scroll Scrolls when you use the Touch Ring.
Scroll
Scrolls your active application down.
Down
Pan/Scroll Scroll Speed
, the
Pan/Scroll (Legacy)
, the
If you pick up your pen to hover, zooming stops. As long as you continue to hover and
hold the button, you can still zoom when you touch the pen tip to the surface again.
Pressing the button while hovering activates a Ctrl + Right-Click.
Pressing the button while touching the surface activates a mouse wheel scroll.
Pan/Zoom to assign it to a button, the
pen button mode does not affect this setting.
Precision Mode
window that appears, move the slider to set the precision that you
window appears. Move the slider to your
Scroll Speed
window appears. Move the slider to
Zoom Speed
User's Manual
window appears.
Fine to Ultra Fine .
25
25