Kohler Persuade Curv K-3723 Detailed Planning Dimensions page 2

12" (305 mm)
Technical Information
All product dimensions are nominal.
Toilet type: Two-piece
Bowl shape: Elongated front
Trap passageway: 2" (51 mm)
Water Consumption
Full: 1.6 gpf (6 lpf)
Reduced: 1 gpf (3.8 lpf)
Water surface size: 4-1/2" x 5-3/4" (114 mm x 146 mm)
Rim to water surface: 8-1/2" (216 mm)
Rough-in: 12" (305 mm)
Seat-mounting holes: 5-1/2" (140 mm)
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
6-16-2015 04:17
Persuade Curv
Notes
Install this product according to the installation
guide.
IMPORTANT! The rough-in must be 12" (305
mm) or more from the base of the wall or
baseboard. Install or relocate the supply and
outlet as necessary to conform to rough-in
dimensions.
If this toilet is installed in new construction, install
a new supply stop following the dimensions in
the diagram.
In installations with the supply stop installed, the
existing supply stop may need to be relocated if
it is less than 8-1/2" (216 mm) from the centerline
of the toilet. Dry fit the toilet to confirm if the
supply stop needs to be relocated.
The supplied hose will extend roughly 6" (152
mm) from the toilet. If the supplied hose does not
reach the supply stop, a longer supply hose may
be used.
For back-to-back toilet installations: Use only a
45° double wye fitting.
Dual Flush Toilet
K-3723