Storage Features - Frigidaire Gallery GRQC2255BF Use & Care Manual

CAUTION
To avoid personal injury or property
damage, handle tempered glass shelves
carefully. Shelves may break suddenly
if nicked, scratched, or exposed to
sudden temperature change. Allow
the glass shelves to stabilize to room
temperature before cleaning. Do not
wash in the dishwasher.
You can easliy adjust shelf positions in
the fresh food compartments as needed.
The shelves have mounting brackets that
attach to slotted supports at the rear of
each compartment.
Change the Position of a Shelf
1. Remove all food from the shelf.
2. Lift the front edge up and pull the
shelf out.
3. Replace by inserting the mounting
bracket hooks into the desired
support slots.
4. Lower the shelf and lock it
into position.
To adjust the flip shelf:
1. Remove food from the shelf.
2. Lift the right side edge of the shelf
upward and push to the left toward
the ice maker.
Flip Shelf

STORAGE FEATURES

To adjust the slide-under shelf:
Push the front half
shelf backward
toward the rear of
the cabinet until
the rear half shelf
drops down. Then
gently continue
pushing the front
half shelf back and under the rear half shelf.
Drawers
The refrigerator includes a variety of
storage drawers.
Auto CrispSeal Drawer
Crispers are designed for storing fruits,
vegetables, and other fresh produce.
Crispers have an auto humidity control
at the rear of each crisper under the
humidity control cover.
To remove the auto humidity control
membrane for cleaning:
1. Reach to back of the humidity
control cover.
2. Place fingers between the humidity
control and the back wall, pulling up
on the cover.
3. Pull the cover toward the front of
the cabinet and remove.
4. Remove the humidity membrane
from the housing by lifting it up and
sliding it over.
5. Clean the humidity membrane with
hot soapy water. Thoroughly dry it
before replacing.
6. Replace the membrane in the
housing and unit by reversing the
steps above.
23
Slide-Under Shelf