Hdmi Input; Operation; Switching On/Off The Tv Set; Choose The Menu Language - Haier HL22K2 Owner's Manual

figure.When connecting the TV to a Cable Box, match
the jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
B
Select the input source by using the
on the remote control or on the TV.
C
Select your desired channel with the remote control
for cable box.

HDMI input

How To Connect
Connect the cables from the external equipment's
output jacks to the TV input jacks, as shown in the figure.
PC IN
U S B
HDMI
How To Use
A
Select the input source by using
the remote control or on the TV.
B
Operate the corresponding external equipment.
Refer to external equipment operating guide.
INPUT button
INPUT button on

Operation

In the manual, the OSD (on screen display) may be
different from your TV's, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in
order for your TV to work properly. Read the instructions
that follow.

Switching On/Off the TV set

A
First, connect power cord correctly.
B
Select the viewing source by using
the remote control.
C
When finished using the TV, press
the remote control. The TV reverts to standby mode.
D
If you intend to be away on vacation, disconnect the
power plug from the wall power outlet.
Note
If the TV in power on , the screen show information
R
according the type of input signal, the information
will disappear. If there is no signal, "No Signal" will
display on the screen.

Choose the Menu Language

When you start using your set for the first time, you must
select the language which will be used for displaying
menus and indications.
A
TV Input and then press MENU button.
Choose
B
Press CH+/- button to select Function menu.
C
VOL+ /ENTER button and then use CH+/-
Press
button to select Language.
D
VOL+/- button to select language.
Press
( English, Spanish or French)
Operation
INPUT button on
POWER button on
Haier LCD HDTV EN-10