Transmission Fluid Change - KYMCO Agility 16+ 50 2022 Manual

Transmission Gear Oil change
1. Stand the scooter by the center stand.
2. Remove the gear oil drain bolt
3. Remove the gear oil filler bolt
then slowly rotate the rear wheel to drain
the gear oil off.
4. Fill with the recommended oil to reach
the capacity listed below.
5. Install the transmission filler bolt and
tighten it to the specified torque.
Gear oil type: SAE 90
Full capacity: 0.2L (0.19 US qt)
Exchange capacity: 0.18L (0.17 US qt)
CAUTION
Use the genuine engine oil or another with the
same quality and grade to avoid burnout on the
bearing or damage on the gear set.
MAINTENANCE
.
1
,and
2
Must follow the local regulation and obey the
related prohibition about the disposal of oil.
1
CAUTION
2
33