Table of Contents
Advertisement
Maintenance and Questions
Clean·stop operation
1. For safety, please pull out the power plug before cleaning.
2. Please use soft cloth or sponge to clean this product, dipping water or
soapy water(non-corrosive neutral cleaning agent) , using dry cloth to
clean product after washing to avoid rusting.
3. In cleaning, should not use water to flush the product, and should not
use scrub brush or steel brush for cleaning.
4. Please don't use materials including organic solvent, boiled water,
washing powder or acid for the cleaning.
5. Providing this product will not be put into operation for a long time, the
power should be switch off. And clean the product according to the
above method, and open the door for air drying , and then keep in
custody after sealing.
Questions:
1. The product doesn't work
● Check the condition of fuse is good or not？
● Check the condition of plug and socket to see if the contact is good or
not？
● Is there any mal-function of input circuit or control circuit？
● Is the power voltage too low？
● Is the outside temperature lower than inner preset temperature？
2. Compressor operation time is long or inner temperature is not low
enough.
Advertisement
Table of Contents
