Color Effect - AgfaPhoto Realishot WP8000 User Manual

 Color effect
This parameter allows you to give a fancy effect to your photos by changing their color.
1. Press the SET key.
2. Press the Left / Right keys to select Color effect.
3. Press the Up / Down keys to select: Standard / Sepia / Monochrome / Vivid.
4. Press the SET key again to confirm your selection.
 Sharpness
This setting allows you to adjust the sharpness of the photo so that the image edges are
clearer or more precise.
1. Press the SET key.
2. Press the Left / Right keys to select Sharpness.
3. Press the Up / Down keys to select: Sharp / Common / Soft.
4. Press the SET key again to confirm your selection.
 Exposure
This setting allows you to adjust the brightness of your photos.
1. Press the SET key.
2. Press the Left / Right keys to select Exposure (EV).
3. Press the Up / Down keys to select an exposure value from +3 to -3.
4. Press the SET key again to confirm your selection.
5. The exposure icon will then be displayed on the LCD screen.
 ISO
It is better to activate this setting if the shooting brightness is low and flash using is not
possible.
1. Press the SET key.
2. Press the Left / Right keys to select ISO.
3 Press the Up / Down keys to select an ISO value: Auto / 100 / 200 / 400.
4. Press the SET key again to confirm your selection.
5. The ISO icon will then be displayed on the LCD screen.
 Metering
This setting allows you to adjust the metering point.