GE FHV5SGWW Service Manual page 23

MAINTENANCE SERVICE AND TROUBLE SHOOTING
Maintenance Service and Trouble Shooting
(1) If the freezer is not level, or if the floor is loose, please adjust
the base cover or fasten the floor.
(2) If noise is caused by tighten loose of screw between the base
cover and freezer body, please make it tight.
(3) If the reason for noise is the aging rubber cushion of
compressor or a loose fastening clip, please change rubber
cushion, or secure clip.
(4) If tubing bumps against freezer body, or against each other,
make adjustments accordingly to remove noise.
(5) If fan blade is blocked and thus causes noise, please clear the
obstacles around the fan, or adjust fan blades.
(6) If the fan supporter is loose and noise is caused, please
tighten.
12.1.7 Poor freezing effect analysis and solutions
(1) Check the
"weak" position, please change to "middle" or close to strong
position.
PDF created with pdfFactory trial version
Freezer
position of temperature control dial, if it is set at
２２
www.pdffactory.com
Model:FHV5SGWW/FHV7SGWW