Table of Contents
Advertisement
Installation
Installing on a table
Place this product on a flat, horizontal location.
Attention
• Install this product in a stable location where it will not
be shaken. The video will shake if the location where
the product is installed shakes.
• Take precautions to make sure the product does not
fall and get damaged while you are installing it.
• Take care not to pull on the connected cables. This
can cause the product to fall and may cause injury.
Take precautions to make sure the product does not fall.
Mounting on a tripod
Mount the product on a tripod using the screw hole in the
base of the product. Place the tripod on a flat, horizontal
location.
Turn the screw to securely fix the tripod to this product.
Use a tripod that has a screw that meets the following
specifications:
Attention
• Do not install the unit where people will be passing
back and forth.
• When using the unit mounted on a tripod, do not put
the tripod high above the floor level.
• Mount the unit securely so there is no looseness.
Looseness can cause the unit to fall and may cause
injury.
• When using over long periods, take precautions to
prevent toppling or falling. Pack the product away as
soon as you can after you have finished using it.
Screw for mounting tripod
1/4-20UNC
3.5 mm to 4.5 mm
English
21
Advertisement
Table of Contents
