Table of Contents
Advertisement
1. General Information
These instructions should be read carefully
in full before installation, and retained
for further reference and maintenance.
2. Safety
• Before installation or maintenance, ensure the
mains supply to the smart switch is switched
off and the circuit supply fuses are removed
or the circuit breaker turned off.
1
• It is recommended that a qualified electrician
is consulted or used for the installation of this
smart switch and installed in accordance with
the current IEE wiring and Building Regulations.
• Check that the total load on the circuit
including when this smart switch is fitted does
not exceed the rating of the circuit cable,
fuse or circuit breaker.
Advertisement
Table of Contents
