Chapter 2: Setting Up The Hardware; Installing The Disk Drives - Cisco Network Storage System NSS3000 Series Getting Started Manual

Setting up the Hardware

Installing the Disk Drives

STEP 1
STEP 2
STEP 3
NSS3000 Series Network Storage System Getting Started Guide
This chapter provides instructions for installing the NSS hardware. It describes
how to physically install the NSS and how to use the LCD panel of the front of the
chassis to view the NSS status. It includes the following topics:
•
Installing the Disk Drives
•
Connecting the NSS to the Network
•
Connecting the Power
•
Starting the NSS
•
Using the NSS3000 LCD Panel
Follow these steps to install disk drives in the NSS3000 NAS chassis.
If your NSS has the disk drives already installed, skip this step and go to Step 2.
Remove the contents of the NSS3000 NAS package from the box.
Place the chassis upright on a flat surface.
Unlock the front lock of the chassis.
2
3