LG AVNQ50GM2A5 Owner's Manual page 9

Wireless Remote Controller
1
2
3
4
5
6
7
8
9
Operation Mode
Cooling Mode
Auto Mode or Auto Changeover
Dehumidification mode
Heating Mode
Fan Mode
1
VANE ANGLE Button
Used to set each vane angle.
2
FUNCTION SETTING Button
Used to set or clear Auto Clean, Smart
Clean, Electric heater or Individual vane
angle control.
3
ON/OFF Button
Used to turn on/off the unit.
4
10 JET COOL Button
11
Speed cooling operates super high fan
12
speed.
5
LEFT/RIGHT AIRFLOW Button (OPTIONAL)
Used to set the desired left/right(horizontal)
13
airflow direction.
6
UP/DOWN AIRFLOW Button
14
Used to stop or start louver movement and
set the desired up/down airflow direction.
15
16 7
ON TIMER Button
Used to set the time of starting operation.
17
8
SLEEP TIMER Button
Used to set the time of sleeping operation.
9
SET / CLEAR Button
Used to set/clear the timer.
Used to set the current time(if it input for
3 seconds.)
10
PLASMA Button (OPTIONAL)
Used to start or stop the plasma-
purification function.
11
ROOM TEMPERATURE SETTING Button
Used to select the room temperature.
12
OPERATION MODE SELECTION Button
Used to select the operation mode.
13
INDOOR FAN SPEED SELECTION Button
Used to select fan speed in four steps low,
medium, high and chaos.
14
ROOM TEMPERATURE CHECKING Button
Used to check the room temperature.
15
OFF TIMER Button
Used to set the time of stopping operation.
16
TIMER SETTING(Up/Dow n)/LIGHT Button
Used to set the timer.
Used to adjust the brightness.(if it is not
time adjust mode)
17
RESET Button
Used to reset the remote controller.
*Some functions may not operate depending on
the product.
PRODUCT INTRODUCTION
9