Brother 888-K80 Operation Manual page 15

■ Embroidery settings
4
5
6
7
8
9
1 Select the embroidery frame to be used.
2 Select the center mark and grid lines that are displayed.
3 When set to [ON], you can only select the embroidery
pattern corresponding to the embroidery frame size that
1
you selected in . (page 32)
4 Select the thread color display on the embroidery
screen; thread number, color name. (page 35)
5 Select the thread brand. (page 35)
6 Select the maximum embroidery speed setting.
7 Select the display units (mm/inch).
8 Adjust the upper thread tension for embroidering.
(page 36)
9 Select the size of pattern thumbnails.
0 Select the color of the background for the embroidery
display area.
A Select the color of the background for the thumbnail
area.
1
2
3
0
A
■ General settings
1
2
3
4
5
6
7
8
9
0
1 Select the needle stop position (the needle position for
when the machine is not being operated) to be up or
down.
2 Select whether to hear the beep operation sound.
3 Select whether to display the opening screen when the
machine is turned on.
4 Select the display language.
5 Select whether to turn work area light on or off.
6 Select the level of the input sensitivity for operation keys.
(page 14)
7 Display the service count which is a reminder to take
your machine in for regular servicing. (Contact your
authorized Brother dealer for details.)
8 Display the total number of stitches embroidered on this
machine.
9 The [No.] is the internal machine number for your
machine.
0 Display the program version installed on your machine.
LCD Operation
1
13