Cisco MCS 7825 Series Installation Manual page 10

How to Install Cisco Unified Videoconferencing Manager
In the Configure Servers window, configure server settings:
Step 10
a.
b.
Note
In the Configure Streaming window, choose a server to manage streaming:
Step 11
a.
Note
b.
c.
In the Cisco Unified Videoconferencing Desktop Hostname Configuration window, specify the
Step 12
hostname of the server that clients should use to connect to the Desktop.
Note
In the Ready to Install the Program window, click Install.
Step 13
Click Finish.
Step 14
After installation is completed, verify that the Desktop server is operational:
Step 15
a.
b.
c.
Installation Guide for Cisco Unified Videoconferencing Manager Release 5.5
1-6
Enter the IP address of your gatekeeper in the Gatekeeper IP address field.
Enter the server's NIC IP address in the IP address field under Use Cisco Unified
Videoconferencing Manager for moderation.
Alternatively, choose Do not enable moderation to work without a meeting control server in a
multiple Cisco Unified Videoconferencing 3545 MCU deployment. If you use Cisco Unified
Videoconferencing Manager as your meeting control server, enter the Cisco Unified
Videoconferencing Manager IP address in the IP address of Cisco IOS H.323 Gatekeeper field
so that Desktop uses the Cisco Unified Videoconferencing Manager internal gatekeeper.
You must use the specific IP addresses, not loopback addresses.
When your deployment includes multiple Desktop servers, you must define which one of your
Desktop servers is enabled for streaming.
Choose This Cisco Unified Videoconferencing Desktop will be used to manage streaming
services to define the Desktop server that you are currently configuring as the Desktop server
that is enabled for streaming.
We recommend that you choose only one Desktop server to be a streaming server.
If you install the Cisco Unified Videoconferencing Streaming Server on a separate server, type
the IP address of that server in the Darwin Streaming Server IP address field.
When your deployment includes multiple Desktop servers, and you do not want to define the
Desktop server that you are currently configuring as the Desktop server that is enabled for
streaming, choose Use an alternative Cisco Unified Videoconferencing Desktop to manage
streaming services.
Type the Fully Qualified Domain Name (FQDN) of the Desktop server that is enabled for
streaming in the Server URL field.
Choose Disable streaming for this Cisco Unified Videoconferencing Desktop to disable
streaming for the Desktop server that you are currently configuring.
Make sure that you specify the hostname that clients can resolve.
Access the Desktop Server Administration interface by connecting to the following URL:
http://<SERVERFQDN:PORT>/cuvm/admin
Log in using the default user name (admin) and password (admin).
Open the Status tab of the Desktop Server Administration interface, and verify that all four
types of servers are connected.
Chapter 1 Installing Cisco Unified Videoconferencing Manager
OL-14925-01