Haier HSU-09L03/H Operation Manual page 5

Parts and Functions
Operation
1
2
3
4
11
ON/OFF
13
MODE
14
FAN
15
16
SWING
17
SLEEP
18
LOCK
19
25. RESET
Used to reset the controller back to
normal condition.
26. HEALTH
Used to set healthy operation
Clock set
When unit is started for the first time and after replacing batteries in remote controller,
clock should be adjusted as follows:
Press CLOCK button, "AM" or "PM" flashes.
Press or to set correct time. Each press will increase or decrease 1min. If the
button is kept depressed, time will change quickly.
After time setting is confirmed, press SET, "AM "and "PM" stop flashing, while clock
starts working.
NOTE: (1)The following functions are not available
(2) Cooling only unit do not have functions and displays related with heating.
Hints
After replacing with new batteries, remote controller will conduct self-check, displaying
all information on LCD. Then, it will become normal.
Buttons and display of the remote controller.
5
6
7
8
9
10
TEMP
12
20
SET
21
TIMER
22
CLOCK
23
24
RESET
25
26
4
1. Mode display
AUTO
COOL
DRY
HEAT
FAN
2. SWING display
3. FAN SPEED display
4. HEALTH display
5. LOCK display
6. SIGNAL SENDING
7. TIMER OFF display
8. TIMER ON display
9. CLOCK display
10. TEMP display
11. SLEEP display
12. HEAT display
13. POWER ON/OFF
Used for unit start and stop.
14. MODE
Used to select AUTO run, COOL,
DRY, HEAT and FAN operation
15. FAN
Used to select fan speed LO, MED, HI, AUTO
16. HOUR
Used to set clock and timer setting.
17. SWING
Used to set auto fan direction.
18. SLEEP
Used to select sleep mode.
19. LOCK
Used to lock buttons and LCD
display.
20. TEMP.
Used to select your desired temp.
21. SET
Used to confirm timer and clock settings.
22. TIMER
Used to select TIMER ON, TIMER OFF,
TIMER ON-OFF
23. CLOCK
Used to set correct time
24. HEAT
Used to select heat mode.
12 24
and 26
3
AUTO LO MED HI