Advertisement
WARNING:
motor before you know which
product that is connected.
8. Turn the OFF/ON/START switch to the START
position to start the motor. You will hear that the
product is on.
9. In the display (E), make sure that the radio signal or
cable connection symbol is shown. The symbols
show that the connection between the remote control
and the product is in operation.
Note:
An error message shows in the display if
there is a fault. Refer to
page 94 .
10. Push the operation mode switch (F) up to select
work mode. Push the operation mode switch down to
select transport mode. Refer to
page 60 .
To start the remote control
The remote control can be on with the motor off. The
display shows how the product can operate when you
use the joysticks as if the motor was on. The test
operation is done in the pattern test mode. Refer to
"Pattern test mode" on page 49 .
1. Turn the machine stop button (A) clockwise to
disengage the machine stop.
B
2. Turn the OFF/ON/START switch to the ON position
(B) to start the remote control. The display shows the
home view for when the motor is off. Refer to
view on page 35 .
54
Do not start the
Messages on the display on
Operation modes on
Home
To lock and unlock the remote control
1. Make sure that the remote control is connected to
the product.
2. To lock or unlock the remote control, quickly push
the lock button (A) and enter the PIN code. The PIN
code from the factory is "123412".
Note:
If the incorrect PIN code is entered 5 times,
the product is locked. Speak to an approved service
agent.
Note:
If you push the lock button more than 2
seconds, the remote control is locked and the
product stops. Turn the main switch to the OFF
position and then to the ON position to restart the
product.
For instructions on how to change PIN code, refer to
"Remote settings" on page 51 .
To operate the product
WARNING:
see the product at all times when you
operate it with the remote control. The
operation range of the remote control makes
it possible to move the product also when
A
you cannot see it. Risk of injury and
damage.
A
Make sure that you can
1401 - 002 - 15.10.2021
Advertisement
