Haier AB242ACBAC Operation Manual page 18

Cassette air conditioner
Table of Contents

Advertisement

GUIDE TO OPERATION
Comfortable Sleep
At night, before going to bed you can press down the SLEEP button on the
controller and the air-conditioner will run by the comfortable sleeping mode
to make you sleep more comfortable.
Press SLEEP button once to make the air conditioner have the previous-set
sleep time (first power-on is "1h"), the sleep symbol will appear. Press time
button
/
, you can choose the time in 1~8 hours. Each press of
the time increases/reduces 1 hour and "Xh" appears in the temperature
setting part, "OFF" appears in "TIMER OFF" display part and timer-off
time; press SLEEP button again to cancel sleep function, the sleep symbol
disappears.
In cooling, dehumidifying mode
One hour after sleeping operation start, the temp. is 1 C higher than
the setting one. After another hour the temp. rises 1 C and then run
continuously for another 6 hrs' and then close. The actual temp. is
higher than the setting one which is to prevent from being too cool
to your sleep.
In heating mode
One hour after start up, the temp. decrease 2 C lower than the
setting one. After another hour decrease by more 2 C.
The temperature will automatically rise by 1 C after another 3 hrs'
operation, and then automatically close after 3 hrs' continuous
operation. The actual temperature is lower than the setting one which
is to prevent from being too hot to your sleep.
Note:
In AUTO mode, unit will run in SLEEP function according to the operation mode.
After setting SLEEP function, it is forbidden to calibrate clock.
If the set sleep-time does not reach 8 hours, the unit will stop opera
after set time is complete.
Set " TIMER-OFF" function first, then set SLEEP, and the sleep-set
set TIMER-ON function first, the sleep function can only be set before T
theSLEEP function first, the TIMER function can not be set.
After setting SLEEP, press CLOCK button to show the time; press T
show the temperature; press again to change temperature.
SETTING T
1 hr
decrease 2 C
1 hr
decreases 2 C
3 hrs
SLEEP RUN BEGINS
Heat mode
SHUT DOWN
about 3 hrs
increase1 C
SLEEP RUN STOPS
16
SLEEP RUN BEGINS
about 6 hrs
increase 1 C
1 hr
increase 1 C
1 hr
SETTING T
Cooling mode
/
OFF
AM
TEMP
ON
OFF
SWING
FAN
MODE
CLOCK
SET
TIMER
SLEEP
LOCK
RESET
SLEEP RUN STOPS
SHUT DOWN
,

Advertisement

Table of Contents
loading

Table of Contents