Checking The Wireless Network Status - HTC Flyer User Manual

173 Internet connections
Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate (*.p12) to HTC Flyer before you can
connect to a Wi-Fi network with EAP-TLS authentication protocol.
1. Save the certificate file to the root folder of the storage card.
2. From the Home screen, press
3. Tap Install from SD card.
4. Select the network certificate needed to connect to the EAP-TLS network.
5. Turn on Wi-Fi and connect to a wireless network.

Checking the wireless network status

1. From the Home screen, press
2. On the Wireless & networks screen, tap Wi-Fi settings, and then tap the wireless
network that HTC Flyer is currently connected to.
A message box is then displayed showing the Wi-Fi network name, status, speed,
signal strength, and more.
If you want to remove the settings for this network, tap Forget. If you want to
reconnect to a wireless network that you have removed, you'll need to choose the
wireless network from the list of available Wi-Fi networks again. If it is a secured
wireless network, you'll need to enter the wireless network credentials again.
Connecting to another Wi-Fi network
1. From the Home screen, press
2. Tap Wi-Fi settings. Detected Wi-Fi networks are displayed in the Wi-Fi
networks section.
3. To manually scan for available Wi-Fi networks, on the Wi-Fi screen, press
and then tap Scan.
4. Tap another Wi-Fi network to connect to it.
, and then tap Settings > Security.
, and then tap Settings > Wireless & networks.
, and then tap Settings > Wireless & networks.
,