Wireless Network - HTC EVO View 4G 32GB User Manual

Turning Wi-Fi On and Connecting to a

Wireless Network

1.
Press > and tap
.
networks
2. Select the check box to turn Wi-Fi on. The
Wi-Fi
device will scan for available wireless networks.
3. Tap . The network names and security
Wi-Fi settings
settings (Open network or Secured with WEP) of
detected Wi-Fi networks are displayed in the Wi-Fi
networks section.
4.
Tap a Wi-Fi network to connect. If you selected an
open network, you will be automatically connected
to the network. If you selected a network that is
secured with WEP, enter the key, and tap
Depending on the network type and its security
settings, you may also need to enter more information
or choose a security certificate.
Settings > Wireless &
Connect
When your device is connected to a wireless network,
the Wi-Fi icon ( ) appears in the status bar and tells
you the approximate signal strength (number of bands
displayed).
If
Network notification
icon ( ) appears in the status bar whenever the
device detects an available wireless network within
range.
Note:
The next time your device connects to a previously
accessed secured wireless network, you will not be
prompted to enter the WEP key again, unless you reset
your device to its factory default settings.
Wi-Fi networks are self-discoverable, which means no
additional steps are required for your device to connect
to a Wi-Fi network. It may be necessary to provide a
.
user name and password for certain closed wireless
networks.
3B. Web and Data Services
in Wi-Fi settings is enabled, this
129