Installing A Populated Carrier Card - Cisco AS5400 Installation Manual

Chapter 2 Dial Feature Card and Carrier Card Guidelines
If the backplane slot is to remain empty, install a blank cover over the open slot to ensure proper airflow
Step 6
inside the chassis. (See
Figure 2-6

Installing a Populated Carrier Card

To install a populated carrier card:
Step 1 Slide the carrier card into the slot until it touches the backplane connector. (See
Figure
Figure 2-7
Figure 2-8
Align the captive screws with their holes, and seat the card completely.
Step 2
78-13311-01
Figure 2-6.)
Blank Filler Panel
2-8.)
Install the Carrier Card in the Cisco AS5350
Install the Carrier Card in the Cisco AS5400
Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide
Removing and Installing Populated Carrier Cards
Figure 2-7 and
2-5