Checking The Wireless Network Status - HTC Desire S User Manual

178 Internet connections
Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate (*.p12) to your phone before you can
connect to a Wi-Fi network with EAP-TLS authentication protocol.
1. Save the certificate file to the root folder of the storage card.
2. From the Home screen, press
3. Tap Install from SD card.
4. Select the network certificate needed to connect to the EAP-TLS network.
5. Follow the steps in
page 177 to connect to the Wi-Fi network.

Checking the wireless network status

1. From the Home screen, press
2. On the Wireless & networks screen, tap Wi-Fi settings, and then tap the wireless
network that the phone is currently connected to.
A message box is then displayed showing the Wi-Fi network name, status, speed,
signal strength, and more.
If you want to remove the settings for this network from your phone, tap Forget. If
you want to reconnect to a wireless network that you have removed, you'll need to
choose the wireless network from the list of available Wi-Fi networks again. If it is a
secured wireless network, you'll need to enter the wireless network credentials
again.
Connecting to another Wi-Fi network
1. From the Home screen, press
2. Tap Wi-Fi settings. Detected Wi-Fi networks are displayed in the Wi-Fi
networks section.
3. To manually scan for available Wi-Fi networks, on the Wi-Fi screen, press
and then tap Scan.
4. Tap another Wi-Fi network to connect to it.
, and then tap Settings > Security.
Turning Wi-Fi on and connecting to a wireless network
, and then tap Settings > Wireless & networks.
, and then tap Settings > Wireless & networks.
on
,