Table of Contents
Advertisement
Infrared and Bluetooth
Problem
I am unable to use
Infrared (IR) to
transfer information.
What do I do?
I can't seem to send
a photo from my
phone via Bluetooth,
what must I do?
My phone and my
computer disconnect
their infrared
connection after 10
seconds. What do
I do?
Camera
Problem
I cannot adjust the
brightness when
taking pictures with
my phone.
138
Solutions
• Transfer only one file at a time or
decrease the number of contact cards
(try sending 25 contact cards only at
a time).
• Line up the IR ports so that they are
unobstructed and within close range.
• Make sure nothing is between the two
IR ports.
• Adjust the room lighting. Some types
of light interfere with IR connections.
Try moving to a different location or
turning off some lights. Do not try to use
infrared beaming in the sunlight.
Sending a photo via Bluetooth is not
supported by your phone.
You can beam a photo, video, contacts or
any other items to another mobile device,
be it an IR- or Bluetooth-enabled device.
For details on how to beam, refer to the
related chapter in this user manual.
Ensure the infrared data transfer rate is
set at 38400 bps or 57600 bps. Any faster
and the connection may be too sensitive,
any slower and you are not utilizing the
full capabilities of the infrared (this is
not linked to modem speed, so it is not
necessary to reduce to 9600 bps).
Solutions
While on the Camera screen, click Menu >
Ambience > Adjust View, and adjust the
brightness using the navigation control.
Advertisement
Table of Contents
