Using The Notify Feature; Assigning Speed Dial Lists To One-Touch Keys - HP MFP Analog Fax Accessory 300 Supplementary Manual

Using the Notify feature

This feature is new for the HP LaserJet 9040/9050mfp and HP Color
Note
LaserJet 9500mfp.
As shown at callout 9 on the fax feature screen illustration, the new
fax user interface contains a Notify button at the bottom of the
screen.
Notify allows you to select how you are notified of the status of an
outgoing fax (that is, if the fax was sent or if an error occurred and the
fax was not sent). The setting applies to the current fax only.
To change how you are notified, perform the following steps.
1
2
3
4
E-mail notification is only available if the MFP e-mail feature has been
Note
configured.

Assigning speed dial lists to one-touch keys

The one-touch keypad allows you to send a fax to a speed dial list
simply by touching one of 12 one-touch keys. The one-touch keys
provide a shortcut to frequently used speed dials. However, prior to
using the one-touch keys, you must create a speed dial list and
assign the speed dial name to a one-touch key.
ENWW
On the control panel main screen, touch the FAX icon to display
the Fax screen.
Touch Notify.
Under the NOTIFY tab:
• Touch NONE to turn off notification (default), and then touch
OK to complete the setting and return to the Fax feature
screen.
• Touch THIS JOB or ON ERROR to enable notification (a
printed report) and complete the notification process, or touch
E-MAIL to display the keyboard.
If you select E-MAIL, use the keyboard to type an e-mail address,
and then touch OK to complete the notification setting and to
return to the Fax menu.
Using the Notify feature 7