Cisco 850 Series Quick Start Manual page 9

Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Figure 1-4 Cisco 871 Wireless Router with Two Antennas
SN: XXXNNNNXXXX
1
LEFT
0
FE0
Step 1
Step 2
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
LAN
FE1 FE2 FE3
To connect the antenna or antennas to a wireless router, follow these steps:
Attach each antenna to a reverse-polarity threaded Neill-Concelman (RP-TNC)
connector on the back of the router and tighten the connector hand-tight.
After you connect the antenna to the back of the router, orient the antenna so that
it is straight up.
Connect the Antenna to the Wireless Router (Optional)
Cisco 871W
WAN
CONSOLE
RESET
AUX
FE4
RIGHT / PRIMARY
+5,+12 VDC
1-9