Cisco CiscoWorks 1105 User Manual page 68

Using the Templates
Step 5
Defining Ethertype Filters
Step 1
Step 2
Step 1
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-14
Select one of the following:
Preview to see your changes before you apply them. (See
•
Template, page 3-131.)
Finish to save the template. (See
•
Another template category to configure more options. (See
•
Categories, page 3-2.)
Procedure
Select Association > Ethertype Filters. The Association: Ethertype Filters
dialog box appears.
Using this option:
• Create new filters—See
• Delete the Filters—See
Using this option you can also:
• Create Special Cases—See
Delete Special Cases—See
•
Creating New Ethertype Filters
Procedure
To create and enable protocol filters for the access point's Ethernet port, enter the
following:
Note Refer to the following URL for a list of Ethertype protocols:
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/acc
sspts/ap350scg/ap350axb.htm#85314
Finishing the Template, page
Creating New Ethertype Filters, page
Deleting Ethertype Filters, page
Creating Special Cases, page
Deleting Special Cases, page
Chapter 3 Configuring Devices
Previewing the
3-132.)
Template
3-14.
3-16.
3-16.
3-18.
78-14947-01