Using the Templates
Procedure
Select 11a Radio > Identification. The 11a Radio: Identification dialog box
Step 1
displays in the right pane.
Click see details to see which versions this option is valid for.
Step 2
Enter the following information to identify the port:
Step 3
Note
Table 3-21 11a Radio Identification Settings
Field
Primary Port?
Adopt Primary Port Identity?
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-74
Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Chapter 3
Description
From the list, select one of the following:
If the primary port was set using
Note
Ethernet > Identification, the
selected value is displayed.
•
Ethernet—Sets the Ethernet port for all
access points other than AP1200's as the
primary port.
Ethernet AP 1200—Sets the Ethernet
•
port for AP1200 access points as the
primary port.
Radio 11b—Sets the 11b radio port as
•
the primary port.
•
Radio 11a—Sets the 11a radio port as
the primary port.
From the list, select one of the following:
•
yes—This adopts the primary port
settings (MAC and IP addresses) for the
Ethernet port.
no—This uses different MAC and IP
•
addresses for the Ethernet port.
Configuring Devices
78-14947-01