Serial Gateway Cable Connections And Pin-Outs; Physical Description Of Dte Cables - Cisco 3545 PRI Installation And Upgrade Manual

Serial Gateway Cable Connections and Pin-outs

Procedure
Connect the DB-60 male connector of the cable to the DB-60 female connector of the unit.
Step 1
Step 2 Tighten the screws.
Connect the remote connectors (V.35, RS-449, EIA-530 and RS-366) to the connectors or the connecting
Step 3
cable of the remote equipment
Serial Gateway Cable Connections and Pin-outs
•
•
•
•
•
•

Physical Description of DTE Cables

These are the DTE cables supplied with the Cisco Unified Videoconferencing 3545 Serial Gateway:
•
•
•
•
•
•
Note •
•
•
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 PRI Gateway and 3545 Serial Gateway Releases 5.6 and 5.7
2-16
Physical Description of DTE Cables, page 2-16
Physical Description of DCE Cables, page 2-20
Data Interface Cable Pin-out Configurations, page 2-22
Data Interface Pin Layouts, page 2-23
Signaling Interface Cable Pin-out Configuration, page 2-25
Signaling Interface Pin Layout, page 2-26
V.35/RS366-DTE, page 2-17
EIA449/RS366-DTE, page 2-17
EIA530/RS366-DTE, page 2-18
EIA530/RS366-DTE-LOS, page 2-18
EIA530A/RS366-DTE, page 2-19
KIV7/RS366-DTE, page 2-19
The DB-25 connector provides the data interface for the
"EIA530/RS366-DTE-LOS"
The DB-37 connector provides the data interface for the
"KIV7/RS366-DTE" cables.
The DB-25 connector provides the RS-366 signaling interface for all Cisco Unified
Videoconferencing 3545 Serial Gateway cables.
Chapter 2 Installing the Cisco Unified Videoconferencing 3545 Gateway
cables.
"EIA530/RS366-DTE" and
"EIA449/RS366-DTE" and
OL-17011-01