Hp Ipaq Setup Assistant; Voice Commands - HP iPAQ 510 Product Manual

5. Enter any short text message if required. You may also make changes to the editable fields in the
e-mail.
6. Press Send to send the message to the recipient.

HP iPAQ Setup Assistant

Use HP iPAQ Setup Assistant to simplify configuring settings on your HP iPAQ.
HP iPAQ Setup Assistant lets you save the settings on your computer. This can help you restore
configuration settings on your HP iPAQ at any time. HP iPAQ Setup Assistant also allows you to perform
a factory reset on your HP iPAQ and view detailed product information.
Using HP iPAQ Setup Assistant, you can manage multiple configurations and apply them quickly to your
HP iPAQ. You can create a new configuration, modify existing settings, delete a selected configuration,
or apply selected settings to your HP iPAQ.
Select the following tabs to configure your settings:
●
Owner Information – Enter your identification information and notes to describe you and your
HP iPAQ. This is helpful if you lose your HP iPAQ.
●
Wireless Network – Wireless Network settings describe the configuration needed to connect to
your work, home, or other wireless network.
●
Proxy – Proxy servers are located between two networks and are used to help prevent an attacker
from invading a private network. You can enter proxy settings to specify the proxy configuration for
your network.
●
E-mail – E-mail settings describe the configuration required to connect to and check your Internet
e-mail accounts.
● Exchange Server – Exchange Server is used to access e-mail, calendars, contacts, tasks, and
other mailbox contents while on the go. You can set up Outlook on your HP iPAQ to synchronize
directly with your organization's Exchange Server.
● VoIP – Voice over Internet Protocol (VoIP) routes voice conversations using an IP-based network.
VoIP to VoIP phone calls to any provider are typically free. SIP Proxy servers are used to implement
call-routing policies and provide features to users.
● Speed Dial – HP iPAQ Setup Assistant helps you to create and manage a list of speed dial numbers
for your HP iPAQ.
NOTE:
and your service provider may also reserve an entry for emergency response.
●
Browser Favorite – Use your HP iPAQ Setup Assistant to create and manage a list of your favorite
URLs. You can access these URLs using the Internet Explorer on your HP iPAQ.
●
Finish – In case of a new configuration, after you click Finish, enter a configuration name and an
optional password and then click OK in the save configuration. If this is an existing configuration,
the existing name and password will be used.

Voice Commands

Use voice commands to look up contacts, dial a contact by name, get calendar information, play and
control your music, as well as launch applications on your HP iPAQ.
Press the Voice Commander button to launch the voice commander application. Wait for the audio cue
to say Say command, and then begin saying a command into the microphone.
The first speed dial entry is usually reserved for Voice mail by your phone service provider,
Using HP Applications 57