Subaru Legacy 2017 Quick Reference Manual page 5

Seating
10-Way Power Driver's Seat
1. Forward/Backward,
Angle and Height
Move the switch toward the front
or rear to move the seat forward
or backward. Pull the switch up
or push down on the front of the
switch to adjust the angle of the
seat cushion. Pulling the switch
straight up or pushing the switch
straight down will adjust the height
of the entire seat cushion.
Memory Driver's Seat
While pressing the "SET" button, press and hold the desired button
"1" or "2". A beep sounds when the seat position is registered.
Press button "1" or "2" to retrieve the seat positions.
1
(if equipped)
2. Seatback
Move the switch in the
corresponding direction to adjust
the angle of the seatback.
3. Lumbar Support
Press the front part of the switch
to increase lumbar support;
press the rear part of the switch
to decrease lumbar support.
(if equipped)
2
3
3