Nikon Super CoolScan 9000ED Repair Manual
  1. Manuals
  2. Brands
  3. Nikon Manuals
  4. Scanner
  5. Super Coolscan 9000 ED
  6. Repair manual

Nikon Super CoolScan 9000ED Repair Manual

Hide thumbs Also See for Super CoolScan 9000ED:
Table of Contents

Advertisement

Quick Links

Printed in Japan March 2004
VRA51701
REPAIR MANUAL
作成承認印
Copyrigh ｃ 2004 by Nikon Corporation.
All Rights Reserved.
無断転載を禁ず !!
VRA51701-R.3607.A
配布許可印
サービス
計画課
Ｍ

Advertisement

Table of Contents
loading

Related Manuals for Nikon Super CoolScan 9000ED

Summary of Contents for Nikon Super CoolScan 9000ED

  • Page 1 VRA51701-R.3607.A 作成承認印 配布許可印 サービス 計画課 Ｍ VRA51701 REPAIR MANUAL Copyrigh ｃ 2004 by Nikon Corporation. All Rights Reserved. 無断転載を禁ず !! Printed in Japan March 2004...

  • Page 2: Table Of Contents

    VRA51701-R.3607.A CONTENTS SPECIFICATIONS M1-M3 DISASSEMBLING External cover Main PCB, Power-PCB Illumination unit, Base unit Stage carriage unit Stage carriage lead screw AF carridge unit AF carriage unit Lead screw, AF motor, mirror uni ASSEMBLY Mirror / AF sensor Assemble AF screw shaft Assemble AF screw shaft   ...

  • Page 3: Specifications

    VRA51701-R.3607.A         Specification Media Negatives and positives, in color and monochrome 1–2 strips of 1–6 frames. Up to 3 frames of 24 × 48 mm or 24 × 65 mm panorama 35-mm film film can be scanned with optional FH-869GR film holder. 35-mm slides 1–5 slides with mounts 1.0–3.2 mm thick.
  • Page 4 * Times for positive film scanned at input resolution of 4000 dpi (2000 dpi when FH-869S is used with Digital DEE) and bit depth of 16 bits (CMS on) using Nikon Scan 4 on Pentium 4 3.06 GHz FSB 533 MHz computer with 1 GB RAM, Windows XP Professional, IEEE 1394 interface, and 1024 ×...
  • Page 5 VRA51701-R.3607.A Optional Film Holders Optional Film Holders FH-869M 120/220 M OUNTED OLDER Film One 6 × 4.5 or 6 × 6 slide and one 6 × 7, 6 × 8, or 6 × 9 slide Size and weight 130 × 320 × 17 mm/5.1˝ × 12.6˝ × 0.7˝ (W × H × D), 170 g/6.0 oz. (approx.) FH-869G 120/220 S TRIP OLDER WITH...

  • Page 6: External Cover D1

    VRA51701-R.3607.A Disassembly Notes: ①　Be sure to remove the power wire before disassembly. ②　When disassembling, make sure to memorize the processing state of wires and FPCs, screws to be fixed and their types, etc.     ③　Because ICs are easily damaged by static electricity, be sure to get yourself earthed/grounded when holding the main PCB and FPCs.　　　　...

  • Page 7: Main Pcb, Power-Pcb D2

    VRA51701-R.3607.A 　 Main PCB, Power-PCB ・ Remove the main PCB (#541) by taking out 6 screws (#192). ・ Disconnect 6 connectors on the main PCB (#560, #551, #516, #509, #510, and #517), then remove the main PCB. 　･ Remove the spring (#45) and unhook the A-part of the power SW (#42). 　 　･...

  • Page 8: Illumination Unit, Base Unit D3

    VRA51701-R.3607.A 　 Illumination unit, Base unit ・ Remove the relay-FPC from the connector of the illumination-PCB. ・ Remove the illumination unit from the base unit (#121) by taking out 4 screws (#192).　 　･ Remove the base unit from the bottom plate (#34) by taking out 4 screws (#197). 　･...

  • Page 9: Stage Carriage Unit D4

    VRA51701-R.3607.A 　 Stage carriage unit ・ Disconnect the connector of the holder motor by pulling it in the direction indicated by the arrow. ・ Remove the holder motor unit by taking out 3 screws (#194).　 ・ Take out 4 screws (#194) and remove 4 retaining springs (#104).　 ･...
  • Page 10 VRA51701-R.3607.A 　 Stage carriage lead screw ・ Loosen 4 screws of the coupling (#137). ・ Take out 2 screws (#192) and remove the SCAN motor unit. ＊ Note: Whenever the SCAN motor unit is detached, reassemble the motor unit by using the SCAN motor assembling tool. ・Take out 2 screws (#194) then remove 2 retaining springs (#104) and screw shaft.
  • Page 11 VRA51701-R.3607.A AF carridge unit ・ Turn the base unit upside down for disassembly. ・ Set aside the connector wire (#517) that is connected from the AF sensor by pulling it in the direction of the below arrow. ・ Separate the screw shaft and AF carriage by taking out 2 screws (#191). ・...
  • Page 12 VRA51701-R.3607.A AF carriage unit ・ Remove the light-shielding cover (#110) by taking out 4 screws (#194). ・ Remove the CCD holder (#108) by taking out 3 screws (#193). The adjustment washers (#109A-G) come off accordingly. ・ Remove the CCD unit (#542) from #108 by taking out 2 screws (#181). ・...
  • Page 13 VRA51701-R.3607.A 　 Lead screw, AF motor, mirror unit ・ Remove the AF motor (#510) by taking out 2 screws (#192). ＊ Note: Whenever the AF motor (#510) is disassembled or replaced, reassemble it by using the AF motor backlash adjustment tool.
  • Page 14 VRA51701-R.3607.A Assembly Mirror / AF sensor ・ Fix the AF sensor (#525) with the screw (#195), and connect the cable (#517). ・ Mount the mirror (#G1) on the base (#121), and fix it with the spring (#153) and 2 screws (#194). 　＊...
  • Page 15 VRA51701-R.3607.A Assemble AF screw shaft ・ Apply the grease on the screw shaft (#112), and turn the nut (#113) on it until reaching the below position. Grease: G-940501 #113 #112 Grease: Sumitec 331 ・Put #114, #115, #116, #117, and #119 in order into the screw shaft (#112), then fix them with the screw (#194). (Apply the grease (G-94051) on the key part of the nut housing (#114), and assemble it with its inner shallower part facing #113-side.) #119...
  • Page 16 VRA51701-R.3607.A Assemble AF screw shaft ・ Mount the AF screw shaft on the base (#121). AF carriage screw shaft #121 ・ Attach 2 retaining springs (#104) with 2 screws (#194). #194 #104 - A3 ･ LS-9000...
  • Page 17 VRA51701-R.3607.A Assemble AF motor ・ Return the base (#121) to the correct position. ・ Attach the AF motor (#510) temporarily with 2 screws (#192). 【Adjustment】 　AF motor backlash adjustment 1) Attach the AF motor backlash adjustment tool (J61191) to the base (#121) with the tool screw. 2) Loosen 2 screws (#192) and turn the AF motor clockwise.
  • Page 18 VRA51701-R.3607.A AF carriage unit ・ Assemble the lens unit (#B91) into the AF carriage (#106), and hook the A part of the retaining plate (#B107) to the groove of #106. Then fix it with the screw (#192). （＊ Note: Assemble #B91 with its marking just upward. ) ・...
  • Page 19 VRA51701-R.3607.A Assemble AF carriage unit ・ Insert 2 guide shafts (#103) into #106. ・ Turn the base (#121) upside down, and assemble the AF carriage unit. AF carriage unit AF carriage screw shaft ＃ 121 - A6 ･ LS-9000...
  • Page 20 VRA51701-R.3607.A AF carriage unit connections ・ Apply the grease (SUMITEC331) on 8 contact-parts of the guide shaft (#103) and the AF carriage holes. ・ Fix 2 guide shafts (#103) with 4 retaining springs (#104) and 4 screws (#194). ・ Connect the screw shaft and the AF carriage unit with 2 screws (#191). #191×2 #194×4 #104×4...
  • Page 21 VRA51701-R.3607.A Stage carriage #507 #190 #128 #194 #B127 #194 #130 #200 #194 #187 #546 #129 #B125 ・ Attach the sensor PCB (#546) on the PCB fix plate (#130) with 2 screws (#187) and 2 washers (#200). 　 （Assemble the PCB fix plate and sensor PCB by aligning their bases.） ・...
  • Page 22 VRA51701-R.3607.A Stage carriage screw shaft unit #137 #135 #132 #114 #133 #132 #131 #192 #509 #136 #139 #194 #134 #192 #135 #192 #104 #138 #194 #151 ・ Attach the start-position plate (#151) on the base (#121) with the screw (#194). 　...
  • Page 23 VRA51701-R.3607.A Assemble Screw shaft ・ Apply the grease （SUMITEC331) to the screw thread of the screw shaft (#131) overall. ・ Assemble the nut (#132) as shown in the below position. Leveled Grease: SUMITEC331 #132 60 mm #131 ・ Assemble in order the spring (#133), nut housing (#114) (by putting from its inner deeper part), and nut (#132) into the screw shaft (#131).
  • Page 24 VRA51701-R.3607.A Procedure for mounting SCAN motor unit ① With the SCAN motor assembly tool (J61192), attach the SCAN motor (#509) to the motor base plate (#138) with 2 screws (#192). J61192 #138 #192×2 #509 ② With the SCAN motor adjustment tool (J61193), fit the coupling (#137) in it and tighten the tool screw by the Hexagonal wrench 1.5mm (J92122).
  • Page 25 VRA51701-R.3607.A Stage carriage unit Place wires in position - A12 ･ LS-9000...
  • Page 26 VRA51701-R.3607.A ・ Pass 2 guide shafts (#123) through the hole of the stage carriage unit. ・ Slide the guide shaft (#123) of A side from side to side until the bearing fits smoothly. ・ Apply the grease (SUMITEC331) on the guide shaft (#123) of B side. Bearing Ａ...
  • Page 27 VRA51701-R.3607.A Holder motor unit ・ Put #143 and #145 on the motor base plate (#B141), and put #144 on the gear base plate (#B142). Then apply the grease (G940501) on the periphery of the larger gear. ・ Attach #B142 to #B141 with 2 screws (#190). #190×2 #B142 #144...

  • Page 28: Illumination Unit A15

    VRA51701-R.3607.A Illumination unit #192 × 3 #545 #184 #190 #192 #B518 #184 #192 #190 #B519 - A15 ･ LS-9000...

  • Page 29: Assemble Illumination Unit A16

    VRA51701-R.3607.A Assemble Illumination unit ・ While pressing #B518 slightly on the boss of the illumination base (#61), attach 2 screws (#192). ・ Put the rod lens (#71) between #B518 and #B519, and fix it with 2 retaining springs (#68) and 4 screws (#184). ＊...

  • Page 30: Base Unit A17

    VRA51701-R.3607.A Base unit ・ Attach the base unit (#121) on the bottom plate (#34) with 4 screws (#197). ・ Attach the illumination unit on the base unit with 4 screws (#192). ・ Connect the relay FPC connector to the connector of the illumination PCB. ・...

  • Page 31: Main Pcb / Power Unit A18

    VRA51701-R.3607.A 　 Main PCB / Power unit ・ Attach the power base (#35) with 4 screws (#192). ・ Attach the insulating sheet (#50) and the power PCB (#522) with 4 screws (#192) and #197. ・ Connect each connector (#560, #509, #510, #517, #516, and #551), and attach the main PCB (#541) with 6 screws (#192). ・...

  • Page 32: Front Panel

    VRA51701-R.3607.A Front panel #184 Grease: MZ-800S #184 #557 #557 #194 #544 - A19 ･ LS-9000...
  • Page 33 VRA51701-R.3607.A ・ Hook the spring (#49) to the door (#39). ・ Hook the spring (#49) to the door fix plate L (#40), and engage them in the door (#39). ・ Attach teh door fix plate L (#40) on the front panel (#B331) with with 2 screws (#184). #184×2 #B331 ・...
  • Page 34 VRA51701-R.3607.A ・ Assemble the eject button (#44) and attach the eject PCB (#544) with 2 screws (#194). ・ Connect the connector of #557 to #544, and also connect the LED to #B331, and arrange the harness of #557. #544 #557 #194×2 Note: Arrange the #557 harness.

  • Page 35: External View A22

    VRA51701-R.3607.A External view #36 Back side Attach by leaving approx. 8-mm clearance from the #192×8 #192 #36 Front side edge of #31. #36×2 #36×2 Attach by aligning the line Approx. 8 mm of front panel. #188×2 #188×2 #192×10 Front panel's line #192 #192×3 #192...

  • Page 36: Adjustments

    VRA51701-R.3607.A Adjustment CCD Adjustment ・Adjust the CCD Adjustment, whenever the CCD unit, mirror or lens units are disassembled or replaced. ・The CCD adjustment consists of 3 adjustments of: magnification, CCD position adjustment, and AF adjustment. 　・By using the CCD adjustment software, scan the glass chart inserted in the main body, then adjust the CCD unit mounting position or adjust the thickness of adjustable washers by checking the display on screen of the software.
  • Page 37 VRA51701-R.3607.A < Preparation > ・Decompress the compressed file “J65051.zip”, and store files in any folder. ・Connect LS-9000ED to PC and turn the power ON. ・Insert the adjustment and inspection glass chart. Direction for insertion 1. Magnification adjustment ① Double-click on the file "CCD Setup Tool.exe" to start the adjustment software.
  • Page 38 VRA51701-R.3607.A ⑤ Loosen the screw (#181) and slide the CCD unit so that the drop in waveform can be viewed almost in the middle of CCD unit both screens. Then attach it with screws temporarily. #181×2 ⑥ Click "STOP". In case WASHER THICKNESS shows red, loosen 3 screws of AF carriage unit (#193) and adjust the washers (#109A - G) by changing the thickness based on the figure shown.
  • Page 39 VRA51701-R.3607.A 2. CCD position adjustment Click "POSITION ADJUSTMENT" to open the screen for the CCD mounting position adjustment. Click "SCAN" to read the waveform. Loosen the screw (#181) and adjust so that the white dotted line is in the middle, parallel to green parallel lines and also in the middle of the vertical dip of blue waveform on each 3 screen (i.e.
  • Page 40 VRA51701-R.3607.A 3. AF adjustment ① Click "AF". ② When the lower-left lamp of screen changes from "NG (red)" to "OK (green)", click "EXIT". ※ In case of NG, click "AF" again. But if the lamp still shows NG after repeating this several times, it is considered as defective.
  • Page 41 VRA51701-R.3607.A How to use Inspection Software 1. Purpose 　This software is used when LS-9000ED is disassembled or its parts are replaced or inspections are made. 2. Preparation (tools required) ・DOS/V PC ・IEEE1394 board ( Use the product of package as it is. ） 　...
  • Page 42 VRA51701-R.3607.A ・Main/Sub-scan perpendicularity 　　Get the angles (between the main scanning and sub-scanning) at 3 alignment marks (upper-left, upper-right, lower-right), then comparing them with set values, check the slant of the main scanning line. ・Magnification 　　Get the magnification of optical system based on the distance between 2 alignment marks of the main scanning direction.
  • Page 43 VRA51701-R.3607.A 4. How to inspect 4-1. Start up the service software. ・Decompress the compressed file “J65049B.zip”, and store files in any folder. ・Connect LS-9000ED to PC and turn the power ON. ・Insert the adjustment and inspection glass chart. ・Double-click the file "S100Sv.exe” to start the inspection software. ・Click "Service mode".
  • Page 44 VRA51701-R.3607.A 4-2. Procedure for inspection ＊ Check the firmware version 　Select "Run" on the main menu, then choose "Initialize" and "INQUIRY" from the pulldown menus, in order to check the firmware version. Press "OK" after the check. Firmware version - A31 ･ LS-9000...
  • Page 45 VRA51701-R.3607.A Procedure for Firmware upgrading ① Save the firmware in any folder. ② Select "Setting" on the main menu, and choose "Set Parameters" from the pulldown menu.　 ③ Click "Reference" to designate the folder where the firmware was saved in ① . ④...
  • Page 46 VRA51701-R.3607.A ⑦ Select "Run" on the main menu, and choose "Download" from the pulldown menu. ⑧ Click "Start" to upgrade the firmware. ⑨ When "OK" is displayed in Result, the upgrading is completed. - A33 ･ LS-9000...
  • Page 47 VRA51701-R.3607.A ＊ Illumination irregularity ・Select "Run" on the main menu and choose "Illumination Irregularity" from the pulldown menu. ・Check if there is no problem with R, G, B,I waveforms. Inspection result on illumination irregularity Inspection result on Illumination irregularity In the above screen, the CCD sensor addresses are allocated on the horizontal axis. If foreign matter such as dust enters between the LED illuminator and CCD sensor, the waveform of the address shifts significantly downward, so dust, etc, can be recognized by visual check.
  • Page 48 VRA51701-R.3607.A ＊ Shading （check the shading ON data） ・Select "File" on the main menu and choose "Scan Image" from the pulldown menu. ・In "Select the Chart", choose "No chart" and tick the box of "ON/OFF" of SD. Then click "OK". ・The scanning starts automatically.
  • Page 49 VRA51701-R.3607.A Inspection result on saturation ・Click "OK". ・Select "Run" on the main menu, then choose "Shading" and "Maximum/minimum width of compensation" from the pulldown menus. Inspection result on Maximum/minimum width of compensation ・Click "OK". ・Select "Run" on the main menu, then choose "Shading" and "Compensation between Adjacent pixels" from the pulldown menus.
  • Page 50 VRA51701-R.3607.A ＊ Noise inspection ・Select "Run" and choose "Noise Check While Scanning operation" from the pulldown menu. ・When "OK" is pressed, the scanning starts automatically. Check if there is no problem with the operating sounds during scanning. - A37 ･ LS-9000...
  • Page 51 VRA51701-R.3607.A ＊ Mechanical precision inspection ・Select "File" on the main menu, and choose "Scan Image" from the pulldown menu. Then choose “Glass chart” and "4000dpi" for resolution . When "OK" is clicked, the scanning starts. ・When the scanned image of the chart is displayed on the monitor, drag the alignment detection frame (black square frame) at 4 corners with the mouse for adjustment so that the alignment mark (black circle) can be placed enough inside this frame.
  • Page 52 VRA51701-R.3607.A ・Scanning position accuracy 　　Select "Run" on the main menu, then choose "Mechanical Precision Test" and "Precision the Scanning Position" from the pulldown menus. In case of NG: Readjust the alignment mark. Inspection result on scanning position accuracy ・Main/Sub-scan perpendicularity Select "Run"...
  • Page 53 VRA51701-R.3607.A ・Magnification 　　Select "Run" on the main menu, then choose "Mechanical Precision Test" and "Magnification" from the pulldown menus. In case of NG: Adjust the CCD. Inspection result on Magnification ・Aspect ratio 　　Select "Run" on the main menu, then choose "Mechanical Precision Test" and "Aspect Ratio" from the pulldown menus.
  • Page 54 VRA51701-R.3607.A ・MTF Select "Run" on the main menu, then choose "Mechanical Precision Test" and "MTF" from the pulldown menus. In case of NG: Clean the optical system and inspect the AF mechanism unit. Inspection result on MTF ・Flare Select "Run" on the main menu, then choose "Mechanical Precision Test" and "Flare" from the pulldown menus.　　 In case of NG: Clean the optical system and inspect the AF mechanism unit.
  • Page 55 VRA51701-R.3607.A ＊ Inspection on AF focal precision/position Select "Run" on the main menu, and choose "AF-Focal Precision/Position" from the pulldown menu. Then, the AF operates automatically. In case of NG: Clean the optical system and inspect the AF mechanism unit. Inspection result on AF focal precision/position - A42 ･...
  • Page 56 VRA51701-R.3607.A 　＊ IR pass filter 　Select "File" on the main menu and choose "Scan Image" from the pulldown menu. Then select "IR Pass Filter" and click "OK". 　　Attention: Errors may occur, so do NOT insert the chart (holder) into the scanner at this stage ！ Insert the chart (holder) into the scanner, after above is indicated.
  • Page 57 VRA51701-R.3607.A Select "Run" on the main menu, and "IR Leakage Test" (IR pass filter) from the pulldown menu. Inspection result on IR pass filter In case of NG: LED malfunction should be considered. Note: In case the main PCB or parts of the optical system are replaced; After replacing the parts, perform the above "IR Leakage Test"...
  • Page 58 VRA51701-R.3607.A ＊ Rewrite IR pass filter compensation data When the main PCB or parts of optical system are replaced, rewrite the compensation data according to the following instrucition. ① After replacing parts, perform "IR Leakage Test" (IR pass filter) from page A22 to A23. Record each data on inspection results (Leak_g・Leak_s・Leak_k).
  • Page 59 VRA51701-R.3607.A ③ Click "OK". ④ After completing writing, click "OK" to go back to the main menu. - A46 ･ LS-9000...
  • Page 60 VRA51701-R.3607.A ＊ Color reproduction (positive) Select "File" on the main menu, and "Scan Image" from the pulldown menu. Then, choose "PosiChart" and click "OK". The scanning starts automatically. When the scanned image is displayed on the monitor, drag the alignment detection frame (black square frame) with the mouse for adjustment so that the alignment mark (black circle) can be placed enough inside this frame.（Adjust the upper-left and lower-left alignment marks.
  • Page 61 VRA51701-R.3607.A Select "Run" on the main menu, and "Positive Color Reproduction" from the pulldown menu. In case of NG: Clean the chart and inspect the optical system. Inspection result on Positive color reproduction - A48 ･ LS-9000...
  • Page 62 VRA51701-R.3607.A ＊ Log 　　Select "Run" on the main menu, then choose "Log", "Load" and "Scanner". The log data is automatically indicated. 　　When "Run", "Log", "Load" and "File" are selected, the saved log data is called up. 　　When "Log" and "Clear" are selected, the log data in the flash memory on the main PCB is cleared. Clear - - -The log data in the flash memory on the main PCB is cleared/deleted.
  • Page 63 VRA51701-R.3607.A ＊ WB time 　　Select "Run" on the main menu, and "Factory Default W/B time" (WB time) from the pulldown menu. 　　 　　Write Auto: The current WB data is written in the flash memory of the main PCB. 　　　　　　　　 （Perform this when the LED is replaced or parts of optical system is cleaned.） Write: The WB data is written.

  • Page 64: Block Diagram E1

    VRA51701-R.3607.A ブロック図 BLOCK DIAGRAM - E1 ・LS-9000 -...

  • Page 65: Wiring E2

    VRA51701-R.3607.A 配線図 WIRING POWER ASSY P O W E R CABLE ASSY SENSOR BOARD ASSY LED BOARD ASSY HOLDER MOTOR ASSY RELAY FPC ASSY LED CABLE ASSY MAIN BOARD ASSY SCAN MOTOR STEM ASSY ASSY STEM CABLE L ASSY AF MOTOR ASSY STEM ASSY...

  • Page 66: Inspection Standard

    VRA51701-R.3607.A Inspection Standard 1. Illumination ・Illumination irregularity: When no compensation is made (in shipping), the range calculated based on the max. and min. values should be 42% or less. 　　　　　　　　　　　　 49.98% or less (compensationable range) Shading compensation: ・ Shading value of each RGBI with respect to the outputs should be 10% or less. 　...
  • Page 67 VRA51701-R.3607.A 3. Scanning ・Scanning misalignment: 　Body only (except adapters) 　　Main scannig direction: ± 0.2 mm or less　・Sub-scanning direction: ± 0.4 mm or less When the body and holder are used (except the turning holder) 　 Main scannig direction: ± 0.4 mm or less　・Sub-scanning direction: ± 0.6 mm or less 　　...
  • Page 68 VRA51701-R.3607.A 4. Image quality performance 1 ・Total resolving power (MTF): 　RGB-color 　　MTF of 35 lines/mm chart area should be 20% or more 　IR-color 　　MTF of 17.5 line/mm chart area should be 20% or more ・Color registration: 　Among RGB 　　1 pixel or less 　IR-color Scanning misalignment from RGB image should be 4 pixels or less 　　...
  • Page 69 VRA51701-R.3607.A 6. Image quality performance 2 ・Negative film reproducible density range 　Under conditions of CMS off, γ=1, and 16 bits, output images should be scanned within the range from the min. value is (0) to max. value (65535) of RGB. ・Gradation sequence The film with up to 4.2 density should be scanned accurately within ±0.1 of the difference between the output density and ideal density.
  • Page 70 VRA51701-R.3607.A 9. Force to attach/remove ・Force to attach/remove holder 　Force to attach　　9.8 N (1.0 kgf) or less 　Force to remove　　9.8 Ｎ（1.0 kgf) or less 10. Electric power consumption 　AC100V/50・60Hz 0.33A or less 20W or less 　AC240V/50・60Hz 0.22A or less 　　　　　　　20W or less - R5 ･...
  • Page 71 VRA51701-R.3607.A 工　具・TOOLS　 ★：新規設定工具・NEW　TOOL 工具番号 名　称 備　考 Tool No. Name of tool Others J61190 ｶﾞﾗｽﾁｬｰﾄ LS-8000 共通 Glass chart For LS-8000 J61191 AF ﾓｰﾀｰ調整工具 LS-8000 共通 AF motor adjustment tool For LS-8000 J61192 SCAN ﾓｰﾀｰ組立工具 LS-8000 共通 SCAN motor assembly tool For LS-8000 J61193 SCAN ﾓｰﾀｰ芯だし工具...
  • Page 72 VRA51701-R.3607.A 工　具・TOOLS　 ★：新規設定工具・NEW　TOOL 工具番号 名　称 備　考 Tool No. Name of tool Others パーソナルコンピュータ 汎用品 Personal computer RJ is Not available 　IEEE1394　ボード 製品同梱品 　IEEE1394　board Supplied accesory with the product 　IEEE1394　ケーブル 製品同梱品 　IEEE1394　cable Supplied accesory with the product S-219 グリース　G940501 ( ｽﾐﾃｯｸ 219） NET = 100g ★...
  • Page 73 VRA51701-R.3607.A 作成承認印 配布許可印 サービス 計画課 Ｍ VRA51701 PARTS LIST 修 理 部 品 表 Copyrigh ｃ 2004 by Nikon Corporation. All Rights Reserved. 無断転載を禁ず !! Printed in Japan March 2004...
  • Page 74 ����������������� ���������� ���� �� ��� ��������� �� ������������ ������������ ����������� �������������� ���������� ��������� ���������� ���������� ���� ��� ������������ ���������� ���� �� ���������� �� ���� ���������� ������ � � � ������������ ������ ���� � ���･����������...
  • Page 75 ����������������� ���������� ���� �� ������������ ������������� ������������ ������������ �������������� � ������������ ������������ ���������� �� ���� ���������� ������������ ������������ ��������� ���������� ������������ ���� � ���･����������...
  • Page 76 ����������������� � ���������� �� �������������� ���� ������������� ������������ ���������� ���� �� ������������ � ������������ ��������� ���������� � ��������� ���������� ������������ ���������� �� ���� ���������� ������������ ������ � � ������������ ������������� � ������������ ���� � ���･����������...
  • Page 77 ����������������� ���������� ���� �� ������ ���������� ���� �� ���������� �� ���� ���������� ������ ������������ ������������ ��� ��������� �� ���������� ���� � � ���� � ���･����������...
  • Page 78 ����������������� ���������� ���� �� ������������ ���������� ���� �� ���������� ���� �� � ������������� ���������� �� ���� �������������� ��� ����������� �� ������������ ���������� ���� �� ������������� ������������ ���������� ���� �� ������������ � ������������� ������������ ��������� ��� �� ���� � ���･����������...
  • Page 79 ����������������� ���������� ���� �� ������ ������������� ������������� ������������ ��������� ��� �� ������������ ������������ ������������ �������������� ������������ ���������� ���� �� ������������� ���������� �� ������������ ���� ���������� ��������� ���� ������������� �� ������������ ������������ ���������� ���� �� ���������� ���������� ���� �� �� ���� �����������...
  • Page 80 ����������������� ������������ ���������� �� ���� ���������� � ����������� �� ��� �������� ���������� �� ���� ����������� ������������ ���������� ���� �� ������������ ������������ ���������� ���� �� ������������ ������������ ������������ ������������ ���������� ���� �� ���������� �� ���������� ���� �� ���� ��������� ������������ ��������� ����������...
  • Page 81 ����������������� ���������� �� ���� ��������� ������������ �������������� ��������� �� ���� ���������� ���������� �� ���� ������������ ����������� ��������� ���������� ��������� ���������� �� ����������� ���� ���������� ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ �������������� ������������ ��������� ��� �� ������������� �������������...
  • Page 82 ����������������� ������������ ����� ������������ ����� ������������ �������� ������������ ������������ ���� � ���･��������...
  • Page 83 Parts List LS9000 VRA51701-R.3607.A Term Pcs, Q'ty/ Part Number Part Code 名　　称 Part Name Main Assembly Remarks /Unit Order Deliver 6B999-106 (6B999-106) FRONT PANEL UNIT ○ フロントパネル部組 * 6K014-051 (6K014-051) 小ネジ SCREW ○ * B1-25050FA (B1-25050FA) SCREW ○ 小ネジ * C1-30030FA (C1-30030FA) SCREW ○...
  • Page 84 ○ ステージキャリッジ部組 * TG552-002 (TG552-002) ミラー MIRROR ○ * TK070-018 (TK070-018) BEARING ○ 軸受 TK080-003 (TK080-003) ＮＩＫＯＮ銘板 NIKON NAME PLATE ○ FRONT COVER SEAL TK083-032 (TK083-032) フロントカバーシール ○ TK087-020-2 (TK087-020) RATING PLATE S/No. ○ 定格銘板　S/No. * TK110-155 (TK110-155) ゴム足 RUBBER STAND ○...
  • Page 85 Parts List LS9000 VRA51701-R.3607.A Term Pcs, Q'ty/ Part Number Part Code 名　　称 Part Name Main Assembly Remarks /Unit Order Deliver TK208-005 (TK208-005) POWER SW BUTTON ○ 電源スイッチボタン TK208-006 (TK208-006) ＥＪボタン EJ BUTTON ○ * TK220-008 (TK220-008) SPRING ○ 送りナットガタ取りばね * TK220-009 (TK220-009) SPRING ○...
  • Page 86 Parts List LS9000 VRA51701-R.3607.A Term Pcs, Q'ty/ Part Number Part Code 名　　称 Part Name Main Assembly Remarks /Unit Order Deliver * TK260-008 (TK260-008) HOLDER GEAR ○ ホルダー送りギア * TK264-001 (TK264-001) 送りねじ減速ギア CONNECTING GEAR ○ * TK330-005 (TK330-005) BEARING ○ 含油軸受け * TK362-040 (TK362-040) ROD LENS...
  • Page 87 Parts List LS9000 VRA51701-R.3607.A Term Pcs, Q'ty/ Part Number Part Code 名　　称 Part Name Main Assembly Remarks /Unit Order Deliver TK600-332 (TK600-332) DOOR FIXED PLATE R ○ ドア固定板Ｒ TK600-333 (TK600-333) ガタ取りばね制限板 PLATE ○ TK600-334 (TK600-334) WASHER ○ ワッシャー TK600-335 (TK600-335) BASE PLATE ○...
  • Page 88 Parts List LS9000 VRA51701-R.3607.A Term Pcs, Q'ty/ Part Number Part Code 名　　称 Part Name Main Assembly Remarks /Unit Order Deliver * TK680-280 (TK680-280) CCD HOLDER ○ ＣＣＤホルダ * TK680-281 (TK680-281) 送りナットハウジング AF CARRIAGE NUT HOUSING ○ TK680-356 (TK680-356) DOOR ○ ドア...
  • Page 89 Parts List LS9000 VRA51701-R.3607.A Term Pcs, Q'ty/ Part Number Part Code 名　　称 Part Name Main Assembly Remarks /Unit Order Deliver * TS258-006 (TS258-006) AF SENSOR ○ ＡＦセンサ TS880-002 (TS880-002) ＣＣＤケーブル部組 IMAGE SENSOR CABLE UNIT ○ * VRG52401 (VRG52401) ＩＥＥＥ１３９４ケーブル(SC-LS1) IEEE1394 CABLE(SC-LS1) ○...

Table of Contents