Table of Contents
Advertisement
Sci: The value you specify (from 0 to 9) controls the number of significant
digits for displayed calculation results. Calculation results are rounded off
to the specified digit before being displayed.
Example: (LineIO) 1 ÷ 7 = 1,4286 × 10
Norm: Selecting one of the two available settings (Norm 1, Norm 2)
determines the range in which results will be displayed in exponential
format. Outside the specified range, results are displayed using non-
> |x|, |x| ≧ 10
exponential format.
> |x|, |x| ≧ 10
-2
Norm 1: 10
-9
Norm 2: 10
Example: (LineIO) 1 ÷ 200 = 5 × 10
Specifying the Fraction Display Format
To specify this
fraction display
format:
Mixed
Improper
Specifying the Stat Format
Specifies whether or not to display a FREQ (frequency) column in the
STAT Mode Statistics Editor.
To specify this:
Show FREQ Column
Hide FREQ Column
Specifying the Table Format
Specifies whether to use function f(x) only or the two functions f(x) and g(x)
in the TABLE Mode.
To specify this:
f(x) only
-1
(Sci 5)
-1
1,429 × 10
(Sci 4)
-1
1,428571429 × 10
10
10
-3
(Norm 1)
0,005 (Norm 2)
Perform this key operation:
(SETUP)
(SETUP)
Perform this key operation:
(SETUP)
(SETUP)
Perform this key operation:
(SETUP)
13
(Sci 0)
(ab/c)
(d/c)
(STAT)
(ON)
(STAT)
(OFF)
(TABLE)
(f(x))
Advertisement
Table of Contents
