Table of Contents
Advertisement
Chapter 14
Using the Command-Line Interface
Menu Reference
This section shows all the menus in the first three levels below the main menu. (There are many
additional menus below the third level; and within the first three levels, there are some non-menu
parameter settings. To keep this chapter at a reasonable size, we show only the menus here.)
The numbers in each heading are the keyboard shortcut to reach that menu from the main menu. For
example, entering
Management> IP Routing menu.
The menus and options, and thus the keyboard shortcuts, might change with new software versions.
Note
Please check familiar shortcuts carefully when using a new release.
Main Menu
1) Configuration
2) Administration
3) Monitoring
4) Save changes to Config file
5) Help Information
6) Exit
Main -> _
1 Configuration
1) Quick Configuration
2) Interface Configuration
3) System Management
4) Policy Management
5) Back
Config -> _
1.1 Configuration > Quick Configuration
See the VPN 3002 Hardware Client Getting Started guide for complete information about Quick
Configuration.
1.2 Configuration > Interface Configuration
This table shows current IP addresses.
..
1) Configure the Private Interface
2) Configure the Public Interface
3) Back
Interfaces -> _
OL-1893-01
at the main menu prompt takes you to the Configuration > System
1.3.1
Menu Reference
VPN 3002 Hardware Client Reference
14-7
Advertisement
Table of Contents
