System Info.
Boot Steps
Diags
Troubleshooting Your HP Visualize Personal Workstation
System information is displayed on the LCD one screen at a time and
should detail the following:
• Bios version
• Number & speed of processors
• Number and capacity of memory modules installed
• Serial Number
To view these details, use the
information screens.
Where available, the Boot steps option will display all POST steps the
next time your Personal Workstation is powered on. For support
purposes, POST steps are shown as POST codes and displayed on the
LCD
as follows:
If your Personal Workstation is powered off when Diags is selected, the
LCD displays a second menu. To perform the diagnostics tests, select
Power on from this menu to enable the hardware management chip to
assess the status of your system's components.
If your Personal Workstation is already powered on, the diagnostic tests
will be performed as soon as you select Diags from the LCD's main menu.
To view the test results for each system component, press the
control button.
Chapter 3
Using HP MaxiLife to Diagnose Problems
button to scroll through the
Post steps will be
HP KAYAK XU
POST Code 24
displayed on the LCD the
next time your Personal
Workstation is powered
on.
47