Cisco 7936 Phone Manual page 13

Figure 2 External Microphone Connections on the Cisco Unified IP Conference Station 7936
2
1 Connect one end of the external
microphone cable to the jack on the
underside of the external microphone.
Perform these steps to install and connect the IP Conference Station to the network.
Place the IP Conference Station on a flat surface, for example, a conference room table or
Step 1
desktop.
Connect one end of the 6-foot CAT 5 cable to your data network port and connect the other
Step 2
end to the network (LAN) port on the PIM.
Connect the free end of the 25-foot CAT 5 cable to the RJ-45 port on the bottom of the
Step 3
IP Conference Station. (The cable is preplugged into the PIM.)
1
2
1
2
Connect the other end of the external microphone
cable to the external microphone jack on the
underside of the IP Conference Station 7936.
13