Installation Instructions For Stacking; Replacement Of Lamp - Samsung CM1929 Series Owner's Instructions & Cooking Manual

INSTALLATION INSTRUCTIONS FOR STACKING

Important
1. Disconnect the power cord from the wall socket before attempting installation.
2. For stacking installation, you must use the "bracket plate" which is enclosed with
this unit.
3. The maximum stacking height is two units.
Stacking the two units is limited to the following models.
Be sure the oven cavity is empty.
CAUTION
Installation
1. Stack two units together.
2. Remove 6 screws as shown in the figure.
3. Place the Bracket-plate to join the two units.
4. Attach and tighten 6 screws as shown in the figure here.
5. Ensure the top oven is at a safe and workable height.
Bracket-Plate
CM1929B_XEU_DE68-04030D-02_EN.indd 25

REPLACEMENT OF LAMP

Important
1. Remove a screw securing the lamp cover.
2. Remove the lamp by rotating it clockwise.
3. Replace with a new lamp by rotating it counter-clockwise.
You don't need to remove outer panel to replace lamp.
Screw
English - 25
Lamp Cover
Lamp Holder
Lamp
(230 V 25 W)
Outer Panel
2017-07-03 8:13:44