Chapter 3. Disassembly And Assembly - Sharp LL-T15G1 Service Manual

CHAPTER 3. DISASSEMBLY AND ASSEMBLY

1. SEPARATING THE LCD FROM THE STAND
1) Remove the screw A and the two screws H, then, remove the hinge cover 2.
2) Remove the four screws B to separate the LCD from the stand.
3) Remove the two screws C and remove the hinge.
4) Remove the two screws i and disassembly the stand.
2. THE LCD SECTION
1) Remove the four screws A and the two screws C, then, remove
the rear panel 1.
2) Remove the two lock screws J and the six screws C, then,
remove the main board shield 2.
3) Remove the four screws F and remove the connector b, c, a
and h, then, remove the main board 6.
4) Remove the four screws D, then, remove the inverter shield 3.
5) Remove the four screws G and remove the connector d, e, f
and g, then, remove the inverter board 7.
6) Remove the three screws E, then, remove the front cover 4,
LED filter 9, key button F and switch board 5.
7) Remove the four screws K and remove the LCD module 8.
D
3
G
h
d
e
7
C
C
D
A
E
K
G
K
8
g
f
b c
d
e
f
g
a
LL-T15G1/E15G1 DISASSEMBLY AND ASSEMBLY
2
C
B
A
1
A
C
2
K
C
E
K
C
F
h
h
6
a
E
5
10
9
4
3 – 1
H
A
B
J
C
c
b
F
i
i